Sussman ES Packaged Electric Steam Boilers

Suitable for industries requiring efficient, high quality saturated steam, including laboratories, hospitals, industrial plants, pilot plants, food and chemical processing applications.

These versatile generators are perfect for almost any application requiring steam from 0-100 PSIG. Each unit is complete with automatic features, including pressure and liquid level controllers, ASME Code pressure vessel and safety valve and are fully tested under power. Each one must pass Sussman's rigid quality control inspection before it is shipped.

Sussman Electric Boilers - your source for fast economical steam energy.

ES SERIES FEATURES:

  • Safe easy -to-use heat source - No on-site products of combustion.
  • Easy, quick to install, they require only a water feed connection and electrical hook-up.
  • Applications include: Steam for tanks, reactors, distillations, autoclaves, dyestuffs, food products, cosmetics, paraffins, glues, steam jacketed kettles,sterilizers, cosmetics, pipe tracing and humidification.
  • Built to Section I, of ASME Boiler and Pressure Vessel Codes - UL listed and CSA certified.
* Name:
Company:
Address 1:
Address 2:
City: State:
 		Zip:
* E-mail:
Telephone:
Fax:
KW, BHP or BTU Required:
Pounds Per Hour of Steam:
Incoming Water Pressure:
Desired Operating Pressure:
Optional Equipment:
Motor/Pump
Condensate Return System
Automatic Blowdown
Blowdown Separator
Step Sequencer
Transformer
Application:
How Did Your Find Us

ES-STANDARD FEATURES:

  • WATER FEED SYSTEM
    Strainer, solenoid valve and check valve factory wired and plumbed.
  • LOW WATER CUT-OFF/LEVEL CONTROL
     McDonnell Miller No. 150 control automatically maintains proper water level, shutting off the boiler when water supply in the boiler drops below a safe operating level.
  • WATER LEVEL SIGHT GLASS
     Allows constant observation of water levelwhile boiler is in operation.
  • MAIN ON/OFF SWITCH
     Allows manual control of the boiler operating control circuit.
  • PILOT LIGHT
     Indicates control circuit's on/off condition.
  • INTEGRAL POWER CONTACTORS
     Magnetic contactors for energizing the boiler elements. Integrally mounted in the control unit.
  • BLOWDOWN/DRAIN VALVES
     Facilitates emptying the boiler pressure level and MM150 water column piping during blowdown sequence.
  • LONG LIFE HEATING ELEMENTS
    Industrial grade, heavy duty 0.420 inch diameter stainless steel heating elements equipped with one piece resistance welded terminations for added strength and safety.
  • OPERATING PRESSURE CONTROL
     Resets automatically to maintain preset pressure within boiler.
  • ENERGY SAVINGS AND MINIMUM MAINTENANCE
     Pressure vessel insulation minimizes heat loss and maximizes energy savings, insured by fibrous glass materials.
  • EASY CONTROL MAINTENANCE
    All control panels and components are easily acessible. Fully-louvered openings avoid component heat build-up.
  • NEMA 1 Louvered enclosure standard

MEETING CODE REQUIREMENTS

  • Pressure vessel rated at 100 PSIG to ASME Section 1, Code M. Vessel National Board Registered.
  • UL Listed. Canadian Standards Association Approved.
  • Electrical construction conforms to NEC standards.

SAFETY FEATURES

  • STEAM SAFETY VALVE
    Automatically opens to reduce pressure should excessive steam cause pressure build-up.
  • STEAM PRESSURE GAUGE
    Allows visual observation of steam pressure over full range
  • MANUAL RESET PRESSURE CONTROL
    Provides high limit pressure cut-out with manual reset.
  • AUXILIARY LWCO
    Standard electronic back-up to primary MM150 control.

STANDARD OPTIONAL EQUIPMENT

A complete complement of optional equipment for ES and other Sussman steam boilers is described in Sussman Product Sheet OES. Options covered are water feed systems, condensate returns, progressive sequencers, automatic blowdown systems, blowdown separators and transformers.

<<View ES Spec. Sheet>>