Sussman SHE Series Steam Heat Exchangers provide efficient product-side steam from plant steam.
For use with reverse osmosis (RO), deionized (DI), distilled and other product side water where the process fluid cannot be mixed or contacted by plant steam or hot water.

Industries requiring this equipment include:

• Pharmaceuticals
• Food and Beverage
• Cosmetics
• Biotechs
• Electronics

These heat exchangers meet rigid production and inspection standards. Each unit is built to your requirements and is complete with Liquid Level Control, Pressure (or Temperature) Controls, Drain Valve, Gauges, Safety Valve and Steel Support Frame.

Materials of Construction

For efficient operation, incoming temperature should be approximately 30°F (17°C) higher than desired output temperature. As a general rule, the house steam PPH requirement must exceed by a minimum 25% the
Product Side Steam PPH requirement.

<<View SHE Spec. Sheet>>

	* Name: Company: Address 1: Address 2: City: State: Zip: * E-mail: Telephone: Fax:
	Type:
	Industrial ID/OD finish as welded and pickle passivated. Options: Polished: Specify Finish Type 316L product side/304 shell side Option: Specify Material:
	Application:
	Clean Steam Output: lbs/hr. (500 lbs./hr.max) Clean Steam Pressure: PSIG Water Input: °F (50°F unless otherwise specified) Plant Steam Pressure: PSIG (must be higher than clean steam pressure) Maximum Head Room: FT. (10 ft. maximum unless otherwise specified)
	Options:
	Motor & Pump Water/Steam Separator